OPTIONS EXPLAINED
Description:
There are 3 tool holders included in the price of the machine. To maximize the workflow and usability of tool change we advise to extend the number of tool holders, so the total number of them is at least equal to number of slots in the tool carousel.
Advantages:
+ Better workflow
+ Less downtime for changing the tools
Can be upgraded at:
– Machines with automatic tool change
There are 3 collets included in the price of the machine. To maximize the workflow we advise to extend the number of collets, so the total number of them is at least equal to the number of tool holders. It is common to have multiple collets in the same size, as different tools can share the same shaft diameter.
Advantages:
+ Better workflow
+ Less downtime for changing the tools
Can be upgraded at:
– All routers
High quality German Becker vacuum pump afford 250m3/hr for optimum material hold down.
The vacuum pump is responsible for holding your parts down on the table. The better the pump, the higher cutting parameters can be. Rising load force from the cutter will be compensated by friction force from the vacuum. The bigger the table, the more of the vacuum will be lost due to amount of open area that vacuum will leak thru. Therefore we advice to upgrade the pump type or their amount where necessary. Especially where a big number of small elements will be cut, or material is porous (think MDF, OSB).
Advantages:
+ Smaller chance to damage job due to movement of the material while cutting.
+ More stable parts while cutting will have better finish quality.
+ Being able to cut smaller parts without bridges.
+ Being able to cut parts in one pass without worrying them to move.
Can be upgraded at:
– All routers
Mist cooling option for nonferrous metals
Cool lubricators will dispense almost any viscosity lubricant and will deliver that lubricant with more precision and reliability than any other dispensing system available. The pulse generator allows for automatic, infinite repeat cycling of the lubricant pump from a single air source.
Automatic lubrication system
High flow phenolic vacuum table for use with vacuum pods
Increased gantry sizes available to accommodate various materials and projects. Higher gantry typically runs to 400mm, however gantries can be extended beyond this.
Tool changer upgrade allows for up to 16 tool positions. Some models are equipped with 16 positions as standard.
Upgrade spindle to a 12kw from 9kw. This can allow for higher spindle speeds, which can result in faster cutting speeds and higher feed rates dependant on material processing.
High powered central dust extraction system.
Industrial touch screen for enhanced user interface experience
Typically used in cabinetry, a 9 position drill bank allows multiple holes of different sizes being produced, without the need for spindle tool changes.
Training is provided with every machine installation, for up to 2 skilled operatives per session. Additional training days on site can be provided, at an additional cost.